Biological monitoring guidance values specifically derived for chemical incidents are preferable but are currently lacking. These guidance values may, in future be derived from Acute Exposure Reference Values. The authors declare that there are no conflicts of interest. Transparency Document. This publication and the learn more work it describes were funded by the Health and Safety Executive (HSE). Its contents, including any opinions and/or conclusions expressed, are those of the authors alone and do not necessarily reflect HSE policy. “
“Di(2-propylheptyl) phthalate (DPHP), CAS No. 53,306-54-0, a REACH
(Regulation (EC) No. 1907/2006) registered high molecular weight phthalate, is primarily used as a plasticizer in polyvinylchloride and vinyl chloride copolymers for technical applications. DPHP, which is marketed under, e.g., the trade name “Palatinol® 10-P”, is produced by esterification of phthalic anhydride with a C10 alcohol consisting of 90% 2-propyl-heptanol and 10% 2-propyl-4-methylhexanol or Belinostat 2-propyl-5-methylhexanol. There are currently two different C10 phthalates on the market. DPHP and di-isodecyl phthalate (DIDP) as described with the CAS No. 68,515-49-1: 1,2-benzenedicarboxylic acid, di-C9-11-branched alkyl esters, C10-rich. Another DIDP described
by CAS No. 26,761-40-0 is no longer produced in Europe and is not REACH registered. Furthermore, there are two C9 phthalates (di-isononyl phthalates, DINPs) on the market: DINP1 (1,2-benzenedicarboxylic acid, di-C8-10-branched alkyl esters, C9-rich, described with CAS No. 68,515-48-0 and DINP2 (di-isononyl phthalate) with CAS No. 28,553-12-0. While DINP2 solely consists of C9 isomers DINP1 contains up to 10% C10 isomers. Thus, the broad isomer distribution of DINP1 (including C10 moieties) can also interfere with the analytical detection of both DIDP and DPHP. The lack of sufficient analytical separation of DINP and DIDP
resulted in a group-TDI by EFSA (EFSA, Demeclocycline 2005) for food contact applications (Commission Regulation (EU) No. 10/2011). The phthalates DINP, DPHP and DIDP are currently used as substitutes for di-(2-ethylhexyl) phthalate (DEHP) which is listed under REACH as a substance of very high concern (SVHC). Based on their low volatility and low vapor pressure, the C10 phthalates DPHP and DIDP are predominantly used in high temperature-resistant products such as electrical cables, carpet backing and car interiors, but they are also used for outdoor applications like roofing membranes or tarpaulins (European Commission, 2003, NICNAS, 2003 and NICNAS, 2008). DPHP is currently not used in food contact.