In this paper, we first perform a thorough electromagnetic design

In this paper, we first perform a thorough electromagnetic design based on rigorous coupled-wave analysis (RCWA) and finite-element method (FEM) for a-Si:H/μc-Si:H tandem TFSCs with a-Si:H layer nanopatterned as a 2D grating. EPZ015938 mouse Considering the dependence of the incident polarization and well engineering the key parameters of the 2D photonic crystal, we obtain the design with maximized absorption to the solar CBL0137 in vivo incidence. Our latest progress in simulating multi-junction SCs enables to look inside the microscopic charge

behaviors of the a-Si:H/μc-Si:H tandem cells so that the electrical response as well as the photocurrent matching degree of the SCs from optical design can then be evaluated in a precisely electrical way. To match the photocurrents between the junctions, a modified design with an intermediate layer is proposed. The optimized cell exhibits light-conversion efficiency up to 12.67%, which is enhanced by 27.72% over its planar counterpart.

Methods Figure  1a shows the diagram of the considered tandem TFSC under a superstrate configuration, which is composed of the glass substrate, SnO2:F top TCO, a-Si:H top junction grated by SiO2, μc-Si:H bottom junction, ZnO:Al bottom TCO, and rear silver (Ag) reflector. Λ x (Λ y ) and b x (b y ) are the pitch and grating width along x (y) direction, respectively, TH-302 concentration and d g is the grating depth. The thicknesses of top and bottom TCOs are 600 and 80 nm, respectively, in order to ensure a satisfactory device conductivity. For the convenience of photocurrent match, we assume a planar system with the

thickness of a-Si:H (d aSi) [μc-Si:H layers (d ucSi)] to be 220 nm (1,700 nm). The PV materials are with fixed volumes under various nanodesigns, i.e., for a-Si:H layer d aSi Λ x Λ y  = b x b y d g , ensuring a fair evaluation of the device performance. Figure 1 Device and duty cycle optimization. (a) Schematic diagram of a-Si:H/μc-Si tandem TFSCs with a-Si:H layer nanopatterned into 2D grating; (b) maximal total current, max(J tot), as a function of duty cycle (b/Λ). Most optical simulations in this study are based on 2D RCWA, which considers the periodicities along both x and y directions and thus is very applicable for analyzing high-dimensionally only periodic structures. To make sure the accuracy and reduce the time of computation, the first 11 diffraction modes are taken into account. It is especially useful for performing optimization task for periodic three-dimensional (3D) nanosystems through wide-range parametric sweep. However, RCWA does not give the full information for SCs, especially for those composed by multiple PV layers. Nevertheless, distinguishing the contribution from each PV layer is crucial for tandem SCs in order to score the photocurrent matching degree. Therefore, a complementing full-wave FEM method is used to obtain the detailed absorption information for the selected systems after initial RCWA designs.

This entry was posted in Antibody. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>