The excipients authorized for ophthalmic use are quite numerous and this step of screening was mainly time dependent. An emulsion is a system which is by essence unstable. The stability is further ensured by the combination of excipients with the surfactants; this combination also defines the size of the emulsion. The concentration of surfactants should be a compromise between stability and toxicity. The most commonly used surfactants are poloxamers, polysorbates, cremophors, tyloxapol, Inhibitors,research,lifescience,medical and vitamin E TPGS. Table 3 Excipients which can be used in an ophthalmic emulsion. To choose
the appropriate excipients and their concentration, parameters like the final osmolality and pH of the nanoemulsion need to be considered. The product to be applied on the eye surface should have these parameters close to physiological values. This introduces another difficulty as the buffers and osmotic agents may also hide the surface charge of the cationic nanodroplets Inhibitors,research,lifescience,medical and potentially destabilize the emulsion. Normal tears have a pH between 6.9 and
7.5 [48]. The literature indicates that the Inhibitors,research,lifescience,medical ocular instillation of 20μL of a buffered www.selleckchem.com/products/BAY-73-4506.html solution at pH 5.5, 0.067M is quickly brought to pH 6–6.5 in the tears [49]. Furthermore, it is usually known that a low pH is well tolerated if it is rapidly brought back to normal tear pH [50], therefore it can be assumed that buffering is not so important. In the case of Novasorb, the emulsion can be slightly Inhibitors,research,lifescience,medical buffered with a tris buffer (Cationorm) or not buffered at all, leaving the natural pH of the mixture. In that case, the tears rapidly restore the physiological pH of the lacrimal film. Neutral osmotic agents, such as polyols (glycerol, mannitol, or sorbitol) were used. The lipid emulsions more or less physically
resemble a simple aqueous-based eye drop dosage forms since more than 90% of the external phase is aqueous irrespective Inhibitors,research,lifescience,medical of the formulation composition. The main difference is its visual aspect: a milky white appearance. The final specifications are summarized in Table 4. It should be noted that even though BAK or CKC is present in the product as the cationic agent, the formulations AV-951 are not preserved [51]. Thus, emulsions are selleck catalog packaged in single use vials filled by the Blow-Fill-Seal technology. Finally, the vehicle typically has a formula as presented in Table 5. Active ingredient is added in the oily phase but some hydrophilic molecules could be added in the aqueous phase to create a combination product. Table 4 Final specifications of the cationic nanoemulsions. Table 5 Composition of a typical vehicle from Novasorb technology. The size of the oil nanodroplets is of utmost importance as it contributes to the stability of the emulsion and to the ocular absorption.